Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
1. Place the fan on a stable surface and ensure that the grilles for the
supply and removal of the air are unobstructed.
2. Connect the power plug to a suitable outlet.
3. POWER: turn ON the FAN by pressing the "POWER " button; the
product start to work with a low speed (green led turn on). Turn OFF
the FAN by pressing the " OFF" button.
4. Select the desired speed pressing the "SPEED" button until the
desired speed LED is lit.
5. Press the " TIMER" button to set timer from 0.5 hour to 7.5 hours
(step 0.5 hour).
6. Pressing the "MODE" button will select either Normal/Nature/Sleep.
7. Press " OSC" button to start and stop the oscillation function. Led
light will turn on/off in the control panel.
Remote control
To start the remote control, use the CE2025 battery. Open the battery
compartment cover and insert and cover with +/- correspondingly.
You can operate the fan through panel control or remote control at a
distance of 10 meters. The following shows which switches perform
which speed and wind functions.
Cleaning and Maintenance
Before any cleaning operation is performed, please disconnect the
power supply line between the equipment and the power supply.
To remove the dirt from the plastic surface, use a soft wet cloth.
Do not use gasoline, diluent or benzene to clean the equipment. Use a
vacuum cleaner to remove dust from the protective shield without
removing them.
Do not immerse the equipment in water or other liquids.
In off-season storage, it is important to keep the equipment in a safe
and dry place. It is important to protect equipment from dust. We
strongly recommend the use of initial packaging to store equipment.
