Airzone Aidoo Pro Manual De Instrucciones página 7

Advanced settings
To perform advanced
configuration of the
device, download the
Airzone Cloud app.
AIRZONE CLOUD
Information
Alias. Allows you to assign an alias to identify each device.
Name. Name of the device.
MAC. MAC address of the device.
Version. Displays the webserver version of the device.
Wi-Fi. Network linked to the device.
IP address. Displays the IP address of the device.
Integration. Integrations available through the webserver. Allows you to make the following
configurations depending on the integration selected:
Local:
•
Local API. Enables the option of integration with third parties via Local API.
•
MDNS. Enables the MDNS service for device discovery within a local network.
Integration port:
•
Modbus RS485. Edition of the Modbus ID and selection of communication speed.
Indoor unit*. Displays the following information for the indoor unit: manufacturer, thermostat
units (configurable in °C or °F), zone temperature and return temperature.
* Not available in Bluetooth configuration.
Airtools settings in Aidoo PRO Aerothermal
Auto Mode (dual setpoint)**. Allows you to configure changing from automatic mode based
on the setpoints defined for the cooling and heating mode. The configurable parameters are:
•
Setpoint differential. Establishes the minimum differential between cooling mode and
heating mode setpoints (by default 1 ºC / 2 ºF).
•
Mode switching protection (min). Allows you to define the minimum operating time
before allowing a change of mode, by default 30 min.
** Available only in air to water units that have Auto mode and that are configured to work
with room temperature (TH).
Limits***. By default it is disabled. Once it is enabled, it allows you to set the maximum
temperature for heating mode and the minimum temperature for cooling mode.
*** Available only if the air to water unit is configured to work with room temperature (TH).
Note: When temperature limits are enabled it will not be possible to use Auto mode.
To access the
advanced settings
follow the steps described
in the Airzone Cloud
support section.
EN
7