Idiomas disponibles
Idiomas disponibles
Turn on
1. Close the door(s) of the appliance.
2. Ensure the power switch is set to [ON] and turn on at the socket.
Switch on the Power [I]. the current temperature within the appliance is displayed.
Manual Defrost
The appliance will automatically run a defrost cycle every six hours.
Note: The cycle starts from the time the appliance is initially powered up.
To manually defrost the appliance:
1. Press and hold the DEFROST button for 5 seconds.
2. The defrost cycle will start immediately and the Defrost LED illuminates. The defrost will last a maximum of 30
minutes.
3. Waste water is collected in the waste water tray.
Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost will start six
hours after the manual defrost has finished.
Cleaning, Care & Maintenance
•
Switch off and disconnect from the power supply before cleaning.
•
Clean the interior of the appliance as often as possible.
•
Do not use abrasive cleaning agents. These can leave harmful residues.
•
Clean the door seal with water only.
•
Always wipe dry after cleaning.
•
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
•
Take care when cleaning the rear of the appliance, sharp edges can cut.
•
An agent or qualified technician must carry out repairs if required.
Cleaning the Condenser
Periodically cleaning the condenser can extend the life of the appliance.
We recommend that out agent or qualified technician clean the condenser.
