RECARO C 6000 Manual De Montaje página 39

Important note:
Align the RECARO adapters in parallel so that they are 230 mm apart.
3. Tightly screw the adapters with the screws (3) and the nut (4) from the installation kit using the
stipulated torque. (size 5 hexagon socket and SW13 spanner).
Torque: M8 screws: 25 Nm ± 2 Nm
Warning!
Ensure that you neither exceed nor fall short of the torque listed above.
If the torque is insufficient, the screws will work loose whilst you are driving. The thread might be
damaged if the torque is too high. The risk of an accident and being injured whilst driving exists in
both cases.
The vehicle must be stopped immediately if a screw works loose and the screws must be replaced
by new screws and tightened up to the stipulated torque with the screw locking device.
RECARO Automotive Seating Page 14 of 25