-
This symbol means: CAUTION: hot surface. The
temperature of the accessible surfaces of the device
may be hot when the device is in operation.
- The motor and telescopic tubes heat up during operation.
Do not touch them during or immediately after use.
- Switch off and unplug the device from the mains when not in
use and before assembly/disassembly or cleaning.
- Check the power cord for visible damage. If the cord is
damaged, it must be replaced by the manufacturer, the
supplier, or qualified personnel to avoid hazards.
- Let the device cool down completely before storing it.
- Keep all packaging materials away from children.
- Always place the power cord so that it does not pose a
hazard.
- Do not move the device during use.
- Plug the device to a properly installed socket. The mains
socket must be accessible to allow for quick unplugging if
necessary. The mains voltage must match the technical
data of the device. Do not use extension cords.
- Do not immerse the cord, plug, or any other part of the device
in water or any other liquid or expose electrical connections
to water. Make sure your hands are dry before handling the
plug or switching on the device.
- If the device falls into water or comes into contact with any
liquid, unplug it immediately from the power supply. Do not
attempt to take the device out of the water if still plugged in.
Should it fall into water, refer to a qualified specialist before
resuming use.
- Do not use the device in damp environments.
- Do not use the device in rooms with easily flammable dust
or toxic/explosive vapours.
- Do not use the device near flammable materials.
8
IRONHERO 1200 MANNEQUIN DRY