Idiomas disponibles
Idiomas disponibles
Precautions
1. Never bend the tip while it is still in the handpiece.
2.
the cutting tips.
Instructions for use
Preparations
Please check before use that the mains voltage is the same as the voltage specifi ed for the
instrument.
Charging
1. First, charge the instrument by connecting the charging station to a mains power
socket.
2. Plug the handpiece into the socket in the charging station. While the instrument is
charging, the LED lights up on the handpiece.
Instructions for use with Ni-MH battery
Before using the instrument for the fi rst time, make sure that it is fully charged. This
process takes 12 hours.
Always fully discharge the Ni-MH battery before completely recharging it. This ensures an
optimal life-span of your device.
Depending on the frequency of use, the product's life-span amounts to about 2 years.
Avoid charging the battery longer than necessary for reaching full charging status. Never
charge longer than 12 hours on end.
Use
1. Fit a cutting tip onto the handpiece. Make sure that the angle of the tip is pointing in the
opposite direction to the operating button, this makes work easier.
Important: Never bend the tip while it is still in the handpiece.
2. Insert the cutting tip into the cavity while it is cold (without pressing the operating button).
3. As soon as the cutting tip is located directly on the canal access, press the operating
button.
4. The tip heats up in seconds and the gutta-percha point can be quickly and cleanly
removed.
5.
immediately cools down and can be removed from the patient's mouth. The operating
button is a "contact button" which only switches the button is released, the instrument
6. Remove the cutting tip from the handpiece after use.
7
