Idiomas disponibles
Idiomas disponibles
1. Insert the worm shaft into the cutter housing, the plastic end first. Fit the cutter blade
unit onto the other end of worm shaft.(The cutting edge should be placed at the front side).
And then you can also fit the coarse/medium/fine grinding disc(Depending on the consi-
stency you prefer). Make sure the notch of the grinding disc fit into the projection on the
opening of cutter house. Fit the Long sheath
on the cutter housing by turning the screw ring clockwise until it is properly fastened.
2. Fit the cutter housing on the motor unit. The lugs on the motor unit must fit precisely
into the slots on the cutter housing. Rotate the cutter housing anti-clockwise until hear a
click. The cutter housing is then locked in the position You can remove the cutter housing
by pressing the release button on the appliance and turning the cutter housing clockwise.
3. Place the tray on the upright part of the cutter housing. Insert minced meat.
4. Now the appliance is ready to prepare sausages. Move the indicator on I function to turn
the meat grinder on.
5. Gently push the minced meat downward, by using the dedicated pestle.
Making sausages advices:
-Put the sausage skin in lukewarm water for 10 minutes. Then slide the wet skin onto the
sausage horn.
-If the skin gets stuck onto the sausage horn, wet it with some water.
INSTRUCTION MANUAL
