Concurrent Boiling of Soft, Medium and Hard Eggs:
You can boil soft, medium and hard eggs in one fill in a single
step. Preferably use same size eggs.
Fill the egg boiler as usual with water. Place
all eggs on the egg holder. First set the
hardness for soft eggs, as described above,
according to size and number of the eggs.
Turn the egg boiler on. Turn the appliance
off as soon as the acoustic signal sounds
and carefully remove the desired amount
of soft-boiled eggs with a tablespoon. Chill
the removed eggs to stop them from further
cooking.
Subsequently resume with the icons for
"concurrent boiling of soft, medium and
hard eggs". Set the controls to
the appliance on again. Turn the egg boiler
of and remove the medium hard-boiled
eggs after the acoustic signal sounds.
For the remaining eggs, to be hard boiled,
turn the controls a bit further to
the appliance on again. Wait for the acous-
tic signal to sound. Turn the appliance off
and disconnect from mains power supply.
NOTE:
If you do not want medium hard eggs, carry on boiling after
removing the soft eggs until the remaining eggs are hard-
boiled.
Rewind Mechanism for Power Cord
Wind the power cord inside the bottom of the appliance for
space-saving storage.
Cleaning and Storage
WARNING
•
Turn the appliance off and disconnect from mains power
supply.
•
Clean and store the appliance only after it completely
cooled down. Risk of burns!
•
Never submerge the appliance in water.
CAUTION:
•
Do not use a wire brush or other abrasive utensils for
cleaning.
•
Do not use aggressive or abrasive cleaning agents.
•
Remove the remaining water inside the egg boiler with a
cloth. In this way you also remove scale residue.
•
Clean the surface with a damp cloth without cleaning
agents, if necessary.
•
Clean hood and egg holder in dishwater.
•
Descaling intervals depend on water hardness and use
frequency. We recommend regular descaling.
•
Descaling is necessary if the appliance turns off before the
water is boiling.
•
Do not use vinegar for descaling, only use commercially
available descaler based on citric acid. Observe the manu-
facturer's dosage recommendations.
Problem
Appliance does
not work
Eggs are crack-
ing
and turn
Eggs do not
have the de-
sired doneness
and turn
Technical Specifications
Model: ..............................................................................EK 3321
Power supply: ........................................................ 230 V~, 50 Hz
Power consumption: ........................................................... 400 W
Protection class: ........................................................................... I
Net weight: ......................................................... approx. 0.800 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and is
manufactured according to the latest safety regulations.
Descaling
Troubleshooting
Possible Cause
Solutions
Wall outlet is defec-
Try a different wall
tive
outlet.
Eggs were not
Pierce the eggs with
pierced
the egg piercer on the
measuring cup before
boiling.
No or too little water
Fill the supplied mea-
filled in
suring cup brimful with
cold water and pour it
into the egg boiler.
Hardness control not
Set the hardness
properly set
control to the desired
position as described
under "Hardness Set-
ting".
Hood not properly
Check the fit of the
placed on appliance
hood.
Appliance turns off
Descale the egg boiler
prematurely due to
regularly. The scale is
scale
difficult to remove if too
thick.
41