Philips SRU 7060/10 Guía De Usuario página 8

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Instructions for use
All manuals and user guides at all-guides.com
4
Press the key under which you want to
store the macro, e.g. the P
Notes:
Once a macro is stored under a key, the original
function of the key can not be used anymore.
You can also store the macro by pressing Shift in
combination with a target key (the target key keeps its original function).
You cannot store a macro under the SELECT, LEARN or SHIFT key.
5
Enter the sequence of keys to be stored, e.g.:
Select DVD mode with SELECT key and press the Standby key.
Select TV mode with SELECT key and press 1.
Select AMP mode with SELECT key and press the Standby key.
Select DVD mode with SELECT key and press 2.
6
To close the macro press the LEARN key.
The DVD label blinks twice to confirm.
If you now select DVD mode and press
(
the P
P key, the remote will switch on the
DVD, the TV and the AMP and starts playing
the disc.
Learn a key
If you miss certain functions from your original remote control of the
SRU 7060, the SRU 7060 can learn these functions from the original remote.
You can store a fuction under any of the available keys of the SRU 7060,
except LEARN, SELECT and SHIFT. Please, note that any function already
stored under a key will be deleted.
Example for VCR:
Make sure you have the original VCR remote control at hand.
1
Select the device mode VCR, with the
SELECT key.
2
Press the LEARN key and the target key on
the SRU 7060 simultaneously for 5 seconds,
until the VCR label blinks twice and remains lit.
3
Place both remote controls on a flat surface
(like a coffee table) and aim them head-to-
head with about 10cm in between.
4
Press the button you want to copy on the original remote control.
If the SRU 7060 has learned the code, the VCR label will blink twice to
confirm the signal is stored.
If the VCR light blinks once for a longer period, the IR signal is not
learned by the SRU 7060. Please, try a few times and make sure the
remotes are aligned as described in step 3.
8
(
P key.
loading