Idiomas disponibles
Idiomas disponibles
2-2-8 Frequency Measurements
EN
Connect red test lead to "Hz" jack and black test lead to "COM" jack.
1
FR
Set Range Switch to "Hz" range
2
Connect the test lead IN PARALLEL to the circuit being measured.
3
ES
Read the frequency value on LCD.
4
20
3. BATTERY & FUSE REPLACEMENT
WARNING
To prevent electrical hazard or shock, turn off
multimeter and disconnect test leads before
removing back cover.
3-1 Battery Check & Replacement
1. As battery power is not sufficient, LCD will display
"
". Replacement of two new batteries type AAA
1.5V is Required.
2. Set Range Switch to " OFF " position .Use a
screwdriver to remove the rear cover. Take out the
battery and replace them with two new batteries of
type AAA1.5V.
3. Place back the rear cover and secure it with the
original screw.
EN
FR
ES
21
