Idiomas disponibles
Idiomas disponibles
2-2-4 AC/DC Current Measurements
EN
FR
To avoid injury, do not attempt a current measurement if the
open circuit voltage exceeds the rate voltage of the meter.
ES
Connect red test lead to the "mA / uA "jack for Current measurements
1
up to 400mA.( For measuring Current between 400mA to 10A ,
Connect red test lead to " 10 A " jack ) Connect black test lead to" COM
" jack.
Set Range selector Switch to desired A range and press DC/AC button
2
to select AC/DC function.
Cut the power to the circuit to be tested and Connect the instrument IN
3
SERIES with the circuit with the black test lead on the negative " - "side
and the red lead on the positive " + "side being measured.
Apply power and read the ampere value on LCD.
4
uA . mA measurement
16
WARNING
Amp measurement
2-2-5 Diode Tests
WARNING
Before taking any in-circuit measurement, remove power from
the circuit being tested and discharge all capacitors in the
circuit.
Connect red test lead to "
1
Set Range selector Switch to "
2
Connect the red test lead to the anode side and black test lead to the
3
cathode side of the diode being tested.
Read forward Voltage( V
) value on LCD.
4
f
If the polarity of test leads are reversed with diode polarity
5
digital reading show " OL ".This can be used for distinguishing anode
and cathode terminal of a diode.
" jack and black test lead to "COM " jack.
" range.
, the
3
EN
FR
ES
17
