Idiomas disponibles
Idiomas disponibles
K
Store in a dry place where the trimmer and battery can be protected from damage.
MAINTENANCE
Always remove the battery pack from your trimmer after use.
Always check the product prior to being used for any damage.
After use, disconnect the battery from the tool and check the tool for damage.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in
your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry room. Keep the motor ventilation slots clean. Keep all working controls
free of dust.
FOR BATTERY TOOLS
The ambient temperature range for the use and storage of tool and battery is 0
The recommended ambient temperature range for the charging system during charging is 0
TROUBLESHOOTING
The following table gives problems and actions that you can perform if your machine does not operate
correctly.
Warning: Switch the machine off and remove the battery prior to any troubleshooting
Problems
Trimmer fails to operate
Trimmer runs intermittently
Excessive vibrations/noise.
Possible Causes
Battery discharged.
Battery too hot/cold.
.
Motor is broken.
Internal wiring of machine
damaged
.
Motor is broken.
Battery not fully charged.
.
On/Off switch defective.
Machine defective.
One side of line has broken off
inside trimmer head.
-45
.
o
o
-40
.
o
o
Corrective Action
Recharge battery; also see
the content in charger manual.
Allow to cool/warm.
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Recharge battery.
Contact Service Agent.
Contact Service Agent.
Bump feed out the remaining
line and properly rewind trimmer
head.
EN
11
