Receiving Another Call While Talking On The Other Line - Sony SPP-M100 Manual De Instrucciones

Tip
If you don't want to hear the handset ring, set the RING ON/
BATT SAVE switch to BATT SAVE. In this case, though you
can still make or receive calls by pressing (TALK), only the line
lamps on the base unit will inform you of incoming calls.
Receiving another call while talking on the
other line
If another call comes while talking on the other line,
you will hear a ringer tone through the speaker of the
handset.
1
Press (HOLD).
The engaged line is put on hold.
2
Press (LINE 1) or (LINE 2), to which another call is coming.
If you want to talk to both parties at the same time
Press (CONF) (conference) after pressing (LINE 1) or (LINE 2).
Now you can talk to both parties. (Three-way conference)
3
When you're done talking to the second party, press
(LINE 1) or (LINE 2), on which you have talked before.
You can resume the conversation with the first party again.
To disconnect the lines during a three-way conference
To disconnect both lines at the same time, replace the handset on the
base unit or press (TALK).
To disconnect line 1 and talk on line 2 only, press (LINE 2).
To disconnect line 2 and talk on line 1 only, press (LINE 1).
To put the lines on hold during a three-way conference
Press (HOLD) once so that both lines are put on hold.
To resume the conversations on both lines, press (CONF).
To resume the conversation only on one line, press (LINE 1) or
(LINE 2), for the line you want. (The other line is kept on hold.)
Tip
During a three-way conference, you can't use "call waiting" service even if you
press (FLASH).
RING ON/
BATT SAVE
EN
17
Basics