Idiomas disponibles
Idiomas disponibles
P-T SWITCH
At on-hook state, slide the MODE switch to T (TONE) or P (PULSE) to select dialing
mode.
P
T DIALING SWITCHABLE
When it is at pulse dialing mode, you can use* to switch to P
For example, when it is pulse dialing mode, at off -hook state, you press "123*45678",
the unit will dial 123 at pulse dialing mode, while dial 45678 at tone dialing mode.
ADJUSTING RINGER VOLUME
Slide RING switch to
ADJUSTING SPEAKERPHONE VOLUME
Slide VOLUME switch to
TROUBLE SHOOTING
? No voice
+ Check if the handset is on the phone or line is broken.
? Receive only
+ Check if P/T mode is properly set.
? Noise
+ Check if the circuit is broken, change the circuit.
Check if the connector is moist or rust, change the connector.
? Ring once then disconnect when receive a call. Dialing function is available
+ Check if connector is in a moist environment.
Check if too many extensions are used together or the quality of extension is not
good enough, change the bad extension.
STATEMENT OF COMPLIANCE
Flamagas S.A. hereby declares that the DTC-760 product complies with the
requisites and basic safety requirements of Directive 1999/5/EC on Radio and
Telecommunications Terminal Equipment.
For a full copy of the statement of compliance please see:
www.electronicafl amagas.com
EN
(High),
(Low) or
(High),
(Middle) or
13
(OFF) according to you need.
(Low) according what you need.
T mixed dialing mode.
