Hold Key; Print Key - Metrix MX 53C Manual De Instrucciones

4.5.

HOLD key

Short press :
Long press :
Autostore
Set the probes on the point to be measured. An audio signal indicates if the measurement
is stable. When you remove the probes, a second audible signal indicates that this stable
value displayed has been stored.
4.6.

PRINT key

This key operates with the optional serial interface for printer or PC :
Short press :
Long press :
28
Fixes the display on the current value.
Accesses or quits the "autostore" mode. Can be accessed in the V
V positions.
AC
Activate / deactivate « send measures to printer » mode at the rate
defined by the user.
Adjust the rate varying from 00000 sec (a single transmission) up to 9h 59
min. 59 sec, using the SEL/ON key (selection of digits) and the RANGE
key (increment the selected digit).
Chapter II
, mV,
DC
Portable digital multimeter