Idiomas disponibles
Idiomas disponibles
KNOW YOUR BELT POWER SUPPLY
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADAPTOR
Use the adaptor to power approved RYOBI 40V tools and
products.
SHOULDER STRAPS
The belt power supply comes with fully adjustable shoulder
and waist straps to ensure user comfort and ease of operation.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
FEATURES
ACTIVE BATTERY PORTS
The belt power supply has two active battery ports. Only one
battery pack needs to be installed for operation. If two bat-
tery packs are installed, each time a tool is turned on, it will
pull energy from the battery pack designated on the adaptor.
LED INDICATOR
The adaptor has a LED indicator to show the battery charge
based on the battery selected.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
OPERATION
APPLICATIONS
„ You may use this product for the following purpose:
„ Supplying electrical power for operating compatible
RYOBI 40V tools
NOTE: Refer to the Compatible Ryobi 40V products and
Tool Categories section on page 6 for information on use
with 40V products.
ATTACHING THE SHOULDER STRAPS
See Figure 2.
„ Unbuckle the waist belt and position it flat with the bat-
tery ports facing up.
„ Attach the shoulder straps to the waist belt by hooking
the back adjustment straps to the waist belt using the
two center belt loops as shown.
„ Attach the front adjustable straps on the outer belt loops.
4 — English
