JVC KD-ADV6580 Manual De Instrucciones página 41

Category Menu item
• ON
• OFF
• ON
• OFF
9
FADER *
Fader
BALANCE
Balance
LOUD
Loudness
VOL ADJUST
Volume adjust
BEEP
Key touch tone
10
AMP GAIN *
Amplifier gain
control
8
* Displayed only when Bluetooth adapter, KS-BTA200 is connected.
* 9
If you are using a two-speaker system, set the fader level to <00>.
* 10
The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level
set higher than "VOLUME 30."
Selectable setting, [reference page]
: Changes the display and button (except EQ/
menu, list search, and playback mode operations.
: Cancels.
: When a call comes in, the display will flash in blue.
• The display will change to the original color when you answer the call or the
incoming call stops.
When the unit receive a text message, the display only illuminates in blue.
: Cancels.
R06 – F06 : Adjust the front and rear speaker output balance.
(Initial: 00)
L06 – R06 : Adjust the left and right speaker output balance.
(Initial: 00)
• LOUD ON : Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
• LOUD OFF : Cancels.
VOL ADJ –05 : Preset the volume adjustment level of each source (except
— FM), compared to the FM volume level. The volume level
VOL ADJ +05 will automatically increase or decrease when you change the
(Initial: VOL source.
ADJ 00) • Before making an adjustment, select the source you want
to adjust.
• "VOL ADJ FIX" appears on the display if "FM" is selected as
the source.
• BEEP ON : Activates the keypress tone.
• BEEP OFF : Deactivates the keypress tone.
• LOW POWER : VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
• HIGH POWER : VOLUME 00 – VOLUME 50
• Off : Deactivates the built-in amplifier.
0
/ ) illumination during
Continued on the next page
SETTINGS 41