EN
Model No.: NGH1K6WH00
DANGER!
THIS APPLIANCE MUST BE GROUNDED
THE APPLIANCE MUST CONNECT TO A CURRENT PROTECTION CIRCUIT OR DEVICE AT
50AMP OR LESS BEFORE BEING CONNECTED TO POWER SUPPLY
NOTE: All wiring must be carried out by a Certified Electrician and must be in accordance
to national and local electrical codes. For certain applications, conduit may be required,
See Figure 2. Check local electrical codes. If you run the wiring in conduit and wish to be
able to turn the heater be sure to purchase enough flexible conduit to allow the heater
to be turned.
HIGH TEMPERATURES – RISK OF FIRE. KEEP FLAMMABLE MATERIALS, SUCH AS
FURNITURE, PILLOWS, BEDDING, PAPERS, CLOTHES, ELECTRICAL CORDS AND
CURTAINS AT LEAST 3 FT. (0.9 M) FROM THE FRONT AND TOP OF THE HEATER AND
KEEP THEM AWAY FROM THE SIDES AND REAR. TO REDUCE THE RISK OF FIRE, DO NOT
USE IT IN AREAS WHERE GASOLINE, PAINT OR FLAMMABLE LIQUIDS ARE USED OR
STORED.
WARNING!
TO REDUCE THE RISK OF FIRE, DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THE HEATER.
www.newair.com
14