Idiomas disponibles
Idiomas disponibles
4.
Lift the heater and position it into the mounting bracket.
5.
Align the screws on the bracket with the keyhole slots in the mounting
bracket.
6.
If you intend to tilt the heater, it must be positioned within the keyhole slots
as shown in Figure 6.
7.
Use a wrench to tighten the bracket screws, ensuring that the unit is securely
suspended and level horizontally or vertically.
8.
If you need to adjust the unit's vertical tilt, simply loosen the bracket screws.
NOTE: To tilt the heater vertically, it must be mounted in the bottom keyhole slots of
the mounting brackets to ensure sufficient clearance and prevent potential
overheating.
9.
Before proceeding, adjust the louvers to your desired position (refer to Figure
7).
NOTE: The louvers are intentionally designed to prevent complete closure. Do not
attempt to override this feature, as it can cause damage to the unit.
www.newair.com
EN
11
