WARNING: Fall Hazard - To prevent the heater from possibly falling, it is crucial to
attach it to a joist using 6 mounting screws. Please note that the screws provided with
the heater are designed for installation in wood framing only and should not be used
with metal joists or other construction materials. If you are installing the heater in a
different type of construction, additional hardware will be necessary to ensure proper
installation. Ensure that all hardware is tightened securely to minimize any risk of the
heater falling.
HEATER MOUNTING
1.
Begin by locating a wood stud or joist in the ceiling and mark a line indicating
the desired location for the heater installation. Please note that the
wall/ceiling mounting bracket allows for installation on either a wall or ceiling,
ensuring that the specific mounting holes and minimum clearances shown in
Figures 4 and 5 are followed.
2.
Determine the exact location for mounting, ensuring that the minimum
clearances mentioned in the manual are maintained. Use the bracket provided
in the box, place a washer on the screws, and insert them securely through
the holes in the mounting bracket. Screw them into a ceiling joist to secure the
bracket.
3.
Attach the heating unit to the mounting bracket.
www.newair.com
EN
10