Tabla de contenido
Stitch length and width/needle position controls
*Auto/Default settings
Your sewing machine will produce most of your stitching
requirements at an Auto/Default Stitch Length and Width. When
a pattern is selected, it will automatically sew at default settings of
stitch length, width and needle position for straight stitch.
Auto (preprogrammed) default settings are easily determined
by moving the Stitch Length and Width / Needle Position
Control Knob. The LED Indicator next to the Control will light
in orange without blinking and a beep will sound indicating you
are at the Auto / Default Position.
*Manual settings
Once you have determined the Auto / Default position you can
manually change the length, width or straight stitch needle
postition according to your preference. Starting at the Auto
position, slide the control knob left or right to locate each of
the potential adjustments. At each manual adjustment point,
the LED will blink 3 times in green and a beep will sound.
The LED will light in red beyond the potential adjustment range.
NOTES: 1. Some patterns offer more opportunities for
manual adjustments than others.
2. A n a l t e r n a t e m e t h o d o f d e t e r m i n i n g
available adjustments is to move the
control knobs while sewing slowly.
Twin needle mode button
The width setting for twin needle sewing can be activated if it is
available for the selected pattern. The LED turns on when twin
needle sewing is activated.
Width setting for twin needle sewing can be activated, if it
is available for a selected pattern. LED turns on when twin
needle sewing is activated.
26
Tabla de contenido
