Programmed Play - Aiwa XH-A1000 Manual De Instrucciones

PROGRAMMED PLAY

Up to 30 tracks can be programmed from any of the inserted
discs.
PRGM
0-9,+10
DISC
DIRECT
PLAY
Use the remote control.
1 Press PRGM twice in stop mode.
"– –" and the line of PRGM appear on the display.
• When PRGM is pressed once in step 1, the unit enters the
CD KARAOKE PROGRAM (page 28).
2 Press DISC DIRECT PLAY, then press one of the
numbered buttons 1-3 within 3 seconds to select
a disc.
Go to the next step when the tray stops rotating.
3 Press the numbered buttons 0-9 and +10 to
program a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Selected track
Program number
number
4 Repeat steps 2 and 3 to program other tracks.
5 Press d to start play.
RANDOM/REPEAT
c/d
f,g
s
PRGM
Total playing
Total number of time of the
selected tracks selected tracks
To check the program
Each time f or g is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press sCLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last programmed track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT once
so that " appears on the display.
NOTE
• During programmed play, you can not use random play or check
the remaining time.
• During programmed play, you can not select a track. "Can't
USE" is displayed if you attempt to select a track.
• "FULL" is displayed if you attempt to program more than 30
tracks.
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be
skipped during playback.
1 Press CD BLANK SKIP on the main unit.
"CD BLANK SKIP ON" is displayed and a blank skip mark will
appear in the display.
2 Press d to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion will also be skipped.
To return to normal playback
Press CD BLANK SKIP again. "CD BLANK SKIP OFF" is
displayed and the blank skip mark in the display will disappear.
NOTE
• There may be a case where BLANK SKIP PLAY does not
function correctly.
• BLANK SKIP PLAY is automatically canceled when performing
AI EDIT RECORDING (page 21), PROGRAMMED EDIT
RECORDING (page 22), or recording during PROGRAMMED
PLAY (left column) or RANDOM PLAY (page 18).
En
Blank skip mark
19
ENGLISH