Random Play; Repeat Play; Programmed Play - Aiwa NSX-F77 Manual De Instrucciones

Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press the DISC CHANGE button.
Two discs can be replaced.
2 Remove the discs and replace with other discs.
To replace the other two discs, press the DISC CHANGE
button again.
3 Press the x OPEN/CLOSE button to close the disc
compartment.
• When loading an 8-cm (3-inch) disc, make sure to put it onto
the inner circle of the tray precisely. Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa dealer for repair.
• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
• When transporting the unit, remove the discs from the trays.
• When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
the x OPEN/CLOSE button "ERROR" is displayed and the
disc compartment may not close. Remove the disc on that tray.

RANDOM PLAY

All the tracks on the selected disc or on all the discs can be
played randomly.
Press the RANDOM button on the remote control.
RANDOM lights up on the display.
To cancel random play, press again.
• Even if the f button is pressed during random play, a
previously played track cannot be skipped. The unit returns to
the beginning of the current track only.
• Direct selection of the tracks with the numeric buttons is not
possible.

REPEAT PLAY

A single disc or all the discs can be played repeatedly.
Press the REPEAT button on the remote control.
¬ lights up on the display.
To cancel repeat play, press again.

PROGRAMMED PLAY

Up to 30 tracks can be programmed from any of the inserted
disc.
Use the remote control
1 Press the PRGM button twice in stop mode.
The PRGM indicator flashes on the display.
• When the PRGM button is pressed once in step 1, the unit
enters the KARAOKE PROGRAM (page 18).
2 Press the DIRECT button, then press one of the
numeric buttons 1 to 5 within 3 seconds to select
a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
3 Press the numeric buttons and the +10 button to
program a track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
Selected track number
Program number
4 Repeat steps 2 and 3 to program other tracks.
5 Press the d button to start play.
To check the program
Each time the f or g button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the s CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be
programmed after the last programmed track,
To change the programmed tracks
Clear the program and repeat all the steps again.
During programmed play, the EDIT/CHECK, DISC CHANGE,
RANDOM, DIRECT and numeric buttons do not function.
Total number of
selected tracks
Total playing time of
the selected tracks
10
ENGLISH
En