Idiomas disponibles
Idiomas disponibles
Chart V
Pay attention to the water level when refilling water .（Chart V）
Schematic diagram of disassembly and assembly of water pump bracket
1. When adding water, please be careful not to exceed the maximum water level line and not
lower than the minimum water level line.
2. Be sure to use clean tap water.
3. Warm reminder: When the machine is used for the first time, if there is a slight smell, the
water in the water tank will have a slight discoloration, which is a normal phenomenon, non-
toxic and harmless, and will not affect your health.
Remote Control：
1.Open the battery cover at the back of remote controller, install a battery of Mode 3V
CR2032 in it, then you can use it.
Opening method of battery cover: first press and hold in the direction of arrow 1 as shown
in the picture to make the battery cover snap away, and then pull out along the direction of
arrow .
2. When using, please aim at the receiving head.
3. When the battery is used up, pull out the battery cover according to the direction shown
in the picture and replace it with a new battery (CR2032 3V). When replacing the battery,
please pay attention to the positive and negative poles of the battery; after the battery cover
is reset the remote control can be used.
43
