Idiomas disponibles
Idiomas disponibles
3.2 SAFETY SIGNS
The machine has various symbols on it
(fig. 3 ) . They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
DOUBLE INSULATED - Class II:
Device in which protection against
electric shocks is not based exclusively
on the main insulation,but aIso
on additional safety measures such
as double or reinforced insulation.
These measures do not include
earthing devices and do not depend
on the installation conditions
WARNING! In the event of non-
compliance with regulations, the
risk of death and/or damage to
people or property exists.
WARNING! Read the instructions
before operating the machine.
DANGER! Thrown objects. Do
not turn the discharge chute
towards onlookers or animals.
DANGER! Keep people, children and
animals away from the work area.
DANGER! Rotor turning. Always keep
away from the snow discharge opening..
DANGER! Keep hands and feet
away from rotating parts.
DANGER! Never put your hands inside
the discharge chute when the auger
is in motion. Stop the engine before
unclogging the discharge chute.
DANGER! Always use
hearing protectors
DANGER! Wear eye protection.
DANGER! Before carrying out
maintenance on the machine, remove
the battery pack from the machine..
WARNING! Battery charger is
equipped with a safety transformer.
DANGER! Use only in dry surroundings.
WARNING! Read the instruction
manual before using.
WARNING! Do not expose the
accumulator when the temperature
is higher than 45°C.
DANGER! Do not immerse
the accumulator in water and
do not expose it to humidity.
DANGER! Do not throw batteries
into a fire. EXPLOSION RISK!
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised assistance centre.
3.3 IDENTIFICATION LABEL
The identification label holds
the following data (fig. 1 )
1. Manufacturer's address
2. Model
3. Type of machine
4. Sound power level
5. CE conformity marking
6. Weight in kg
7. Motor operating revolutions
8. Motor power
9. Motor displacement
10. Year of manufacture
11. Serial number
12. Article code
13. Machine description
14. Electrical protection rating
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Use the identification names
on the identification label of the product.
IMPORTANT Use these means of
identification whenever you contact
an authorized service workshop.
• IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.
3.4 MAIN COMPONENTS
The machine is made up of the
following main components (fig. 1 ) :
A. Handle
B. Starter lever
C. Starter lever release
D. Chute adjustment handle
EN - 6
