Idiomas disponibles
Idiomas disponibles
5.
Keep your hands clear of the parts a label indicates. Otherwise, you might trap your fingers
and an injury might occur.
8.
Replace the fusing parts and unit after they cool down sufficiently.
9.
Do not touch the parts a label indicates. The inside and surface of the fusing unit could be
very hot. Caution should be taken when removing misfed paper.
10.
This label indicates the weight of the unit. However, this label is meant for customer
engineers and operators who have received training. Do not lift a unit that has this label.
11 and 12.
Areas around which these labels are attached are hot and you will be burned when
touching them. Wait for one minute until the machine cools down, and then start to use it.
Rear side
4
3
1 and 3.
This device is connecting to more than one power cord. All plugs need to disconnected to
stop the electric power supply. For the rated value refer to the rating plate.
2.
This machine uses two power cords. To stop the power supply of the machine completely,
remove all power plugs. Unless all power plugs are removed, fire or electric shock may
result.
4.
Because the current value is high, make sure to connect to the earth before connecting to
the power source.
13
1
2
M0EDIM2007
