Idiomas disponibles
Idiomas disponibles
-
Clean the equipment with a damp cloth
with a few drops of washing up liquid and
then dry.
-
Do not use solvents, or products with an
acid or base pH such as bleach, or
abrasive products, for cleaning the
appliance.
-
Never submerge the appliance in water or
any other liquid or place it under running
water.
-
It is important to self-clean the appliance
at least once a month to remove calcium
and any other built-up minerals inside
the iron.
-
Fill the depository to its maximum level,
as indicated on "water fill" section.
-
Place the iron in the vertical position,
plug into the mains and select the
maximum temperature.
-
Leave the appliance to heat up until the
pilot light indicates that it has reached its
consigned temperature.
-
Unplug the appliance and place it in the
sink.
-
Press the self-clean button, and keep it
pressed down.
-
Let the water fl ow out through the
steam vents in the base, while lightly
shaking the appliance.
-
Release the button after a minute or
when the tank becomes empty.
-
Leave the iron in the vertical position
until it has cooled.
-
For the appliance to work correctly it
should be kept free of limescale or
magnesium incrustations caused by the
use of hard water.
-
To prevent this kind of problem, we
recommend the use of water with low lime
or magnesium mineralisation.
-
Homemade solutions are not
recommended in the decaling of this
appliance, such as the use of vinegar.
