Idiomas disponibles
Idiomas disponibles
-
Extend the cable completely before
plugging it in.
-
Connect the appliance to the mains.
-
Turn the thermostat control to the desired
temperature position.
-
Do not use temperatures higher than those
indicated on the garments to be treated.
• Temperature for synthetic fibres
(Polyester, Nylon...) and silk.
•• Temperature for wool.
••• Temperature for cotton.
(Minimum temperature for steam ironing)
MAX Temperature for linen.
-
If garment has various kinds of fibres,
select the temperature for the fibre that
requires the lowest temperature. (For
example, select the temperature for
polyester for an article made out of 60%
polyester and 40% cotton).
-
Wait until the pilot light (F) has gone out
which will indicate that the appliance has
reached an adequate temperature.
-
During the appliance's use the pilot light
(F) will come on and off automatically,
indicating the heating elements are
working, and therefore maintaining the
desired temperature.
-
The appliance has a steam flow regulator
that permits dry ironing (without steam)
when placed in the 1 position.
-
It is possible to iron with steam
whenever the deposit is filled with water
and the adequate temperature is
selected.
-
The appliance has a control knob (C)
that allows getting the control of the
steam flow.
-
The spray can be used in both steam
and dry ironing.
-
Press the spray button (A) to use this
operation.
-
The spray button has to be pressed
repeatedly to release the first spray.
-
This function proportions extra steam for
eliminating wrinkles.
-
Press the steam blast button (B). Wait a
few seconds until vapour penetrates the
fibres of the garment before pushing the
button again. For optimum steam
quality, do not apply more than three
successive blasts.
-
The steam blast button has to be
pressed repeatedly to release the first
shot.
-
It is possible to iron hanging curtains,
items of clothing on his hanger, etc. To
do so, follow the instructions:
- Select the maximum temperature of the
iron, while turning the temperature
regulator of the iron in a clockwise
direction (Fig.2).
- Move the iron in a top to bottom
direction while pressing the steam
control (B).
Important: for cotton and linen, it's
recommended to put the iron base in
contact with the material. For other more
delicate fibres, it is recommended to
keep the iron base at some centimetres
of distance.
-
Select the minimum position (MIN) using
the thermostat control.
-
Unplug the appliance from the mains.
-
Remove the water from the inside of the
appliance.
-
Clean the appliance.
-
Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
