¾"
Tools Required / Outiles Utiles /
Herramientas Útiles
24 mm
G ½"
4⅝"
English
Technical Information
Recommended water pressure
Max. water pressure
Max. flow rate
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
•
This showerhead requires a ½" shower arm (not
included).
•
The filter gasket installed in the showerhead (part
#96744000) protects the showerhead from
debris in the water supply. The filter gasket may
be removed for cleaning (see page 7), but must
not be permanently removed. If the filter gasket is
removed, debris damage to the showerhead will
not be covered by the Hansgrohe warranty.
•
To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 10°F. In Massachusetts, the maximum out-
put temperature can be no higher than 11° F.
•
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
30 – 60 psi
145 psi
.5 gpm
