Idiomas disponibles
Idiomas disponibles
To adjust the electrode diameter, press the knob until the
icon
has the white arrow below it.
By adjusting the electrode diameter, the equipment will automatically adjust the recommended output current for this
electrode and also select the base material thicknesses that can be welded with the selected electrode diameter, the
material thicknesses that exceed the capacity of the electrode will not will appear in the material thickness adjustment
menu.
To adjust the Hot Start percentage press the knob until
the icon
has the white arrow below it.
Hot Start is a technology that facilitates the starting of the arc, momentarily increasing the current when starting the
arc. You can adjust the value from 100% to 150%.
KEEP WORKiNG
KEEP WORKiNG
Keep Working
in
in
S i
6 1 3 0
S i
7 1 7 5
Turn the knob to set the diameter of the electrode to be
used and press the knob to save.
Turn the knob to set the diameter of the electrode to be
used and press the knob to save.
17
X P S i
7 1 6 0
X P S i
7 2 0 0
in
in
X P
X P
