Idiomas disponibles
Idiomas disponibles
CORDLESS HAND BLENDER
8
the load is too heavy, it will automatically power off. In the case of overload, the 4 blue indicator
lights stay on for 5 seconds and then go out. When the indicator light is always on, the button is
invalid. You must wait the indicator light go out before returning to the working state. At this time,
reduce the volume of food and re-start the product again.
OVERHEAT PROTECTION
When the temperature is ≥65°, the motor will stop working, and the 4 blue indicator lights + 1 red
indicator light will stay flashing.
When the thermistor is short-circuited or open-circuited. We suggest to let the product rest for 15
minutes to cool down and re-start it again.
LOW-VOLTAGE PROTECTION:
If the battery voltage is less than or equal to 8.7V, the 25% blue indicator light will automatically
turn off after 5 flashes, and then the product will automatially stop working. Please charge the
product immediately for 3.5-4 hours and re-start it again.
CHARGING PRIORITY FUNCTION:
When charging, the circuit stops working and priority is given to charging. The product does not
work when charging.
HOW TO CHARGE THE PRODUCT
1. Open the charging port on the product, insert one end of USB cable port into the charging port,
and insert the other end of USB cable port to the power source.
2. When charging, the blue indicator lights will turn on and flash from 25% to 100% indicates the
power charged. When the product is fully charged, the blue indicator lights stop flashing and to be
always on. See the indicator section for more details.
3. The product can be fully charged in 3.5-4hours.
Note: The battery power is about 50% when the product left factory. It is suggested to charge
adequately before first use for optimal performance.
CLEANING AND MAINTENANCE
1. Before cleaning, make sure that the safety lock on the top of the product is locked and the
accessories are separated.
2. Before cleaning, make sure that the product is not charged.
3. To avoid risk of electrical shock, do not immerse the product body or USB cable into water
or other liquids, wipe the product body or USB cable with a soft wet cloth and do not rinse with
water.
4. After cleaning, please wipe or dry parts of the product, and then re-assemble them.
5. Do not sterilize various parts of the product in high-temperature.
STORAGE
1. Before storage, make sure all parts are clean and dry. When fully charged, the battery should
remain charged for up to 3 months. If the storage time exceeds 3 months, the power has been
gradually consumed and should be recharged before use.
When storing, make sure that the switch is in the off position.
TECHNICAL PARAMETERS
Product Name
Product Model
Rated Voltage
Cordless Hand Blender
SL-CS01
11.1V
