Idiomas disponibles
Idiomas disponibles
CORDLESS HAND BLENDER
7
use the type-C USB cable which can bear the current of 1.5A for charging.
PRODUCT OVERVIEW
HOW TO USE
The operating method of the cordless hand blender is the same as that of other hand blenders,
but you can enjoy the space more freely since it is cordless.
1. Cut the food into cubes no more than 15mm, put them into a container, and then add some
clean water or broth, the water temperature should not exceed 60°C.
2. Connect the stirring rod to the motor housing, and rotate clockwise to lock it.
3. Press the safety lock on the top of the product, then the product is unlocked when the blue
indicator is on. Press high speed or low speed button to keep the product running (if you want
to blend the food to bigger pieces, choose the low speed button, if you want to blend the food to
smaller pieces, choose the high speed button). To stir the food faster and better, you can move the
product up and down. Release the switch to shut down the product, and then the product will stop
rotating accordingly. If you have not pressed high speed or low speed button within 3s, the product
will lock automatically. Press the safety lock on the top of the product again to re-start it.
4. If the food is stuck around the blades due to its large size, firstly release the switch button and
wait for the full stop of blades, then carefully remove the food with spoon. Do not touch the blades
directly by hand because they are very sharp. Continue to use it after removing the food.
5. Do not use the product for a long time, the longest time for a single blending work should not
exceed 30s. If working time exceeds 30s, the program will start automatic protection and stop wor-
king. In order to effectively extend the life of the product, we suggest to stop for a rest after every
3 minutes continuous working.
6. When the battery is low, please charge it in time. The product can work for 1hour after fully
charged.
INSTRUCTIONS FOR INDICATOR
Indicator light description during working:
There are 5 indicator lights on the motor housing, during the working of Hand blender, the indica-
tor lights will turn off from 100% to 25% indicates the remaining of power. If the battery level is less
than 25%, the 25% blue indicator light flashes, indicating the product is in a low power state, and it
may shut down at any time and needs to be charged immediately.
OVERLOAD PROTECTION:
The Cordless Hand Blender has an automatic protection system and does not allow overload. If
