Idiomas disponibles
Idiomas disponibles
Important!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Caution!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1
On/Off switch
2
Safety window
3
Spark defl ector
4
Safety hood
5
Grinding wheel
6
Polishing wheel
7
Workpiece support star screw
8
Workpiece support
9
Mounting holes
10 Spark defl ector adjusting screw
11 Speed controller
12 Flexible shaft
13 Locking pin
14 Wrench
Anl_TH_XG_75_Kit_SPK7.indb 18
Anl_TH_XG_75_Kit_SPK7.indb 18
GB
2.2 Items supplied
Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Double-wheel grinder
•
Safety glass with spark deflector
•
Workpiece support
•
Flexible shaft
•
100-piece aAccessories
•
Original operating instructions
•
Safety instructions
3. Proper use
The double-wheel grinder is a combination tool
for the grinding and polishing of metals, plastics
and other materials using the appropriate grinding
wheels.
The fl exible shaft is designed for the grinding,
deburring, polishing, engraving, cutting, milling
and cleaning of wood, metal and plastic in model-
making, in workshops and in the home. Use the
tool and its accessories only for the applications
described.
- 18 -
16.07.13 15:48
16.07.13 15:48
