Screen Description
The screen displays the status of the connected camera, the battery level of the remote
controller, and other information. When controlling multiple cameras, the screen displays the
number of cameras connected. The display on the screen varies depending on the camera
mode.
1
1. Verification Code: displays the verification code. When the camera is found, both the remote
controller screen and the camera screen show the same verification code. Tap Accept on the
camera screen.
2. GPS Signal: displays GPS signal strength. When the remote controller is searching for the
GPS signal, the
3. Battery Level: displays the battery level of the remote controller.
4. Connection Status: displays the connection to the camera via Bluetooth.
5. microSD Card Information: displays either the remaining number of photos or the video
duration that can be taken or recorded according to the current shooting mode. The icon is
displayed only when a camera is connected.
6. Screen Information: the camera information will be synchronized when the camera is
connected.
The screen will enter sleep mode if there is no operation within 3 minutes. The remote
controller will power off if there is no operation after 10 minutes when there is no camera
connected and the remote controller is not charging. When the screen is off, press any button
to exit sleep mode and continue using the remote controller.
©
6
2023 DJI All Rights Reserved.
2
3
4
icon will be displayed.
5
6
