DJI Osmo Action GPS Manual De Usuario página 5

Button Features

Quick Switch Button

• Press and hold: power on or off the remote controller.

• Press once: switch between shooting modes when connected to the camera.

Link Button

• Press and hold: link the remote controller and the camera.

• Press once: power on the camera when the camera is in sleep mode and connected to

the remote controller. During the linking process, press once to cancel linking.

Shutter/Record Button

• Press and hold: power off the camera. When the camera is in sleep mode, press and hold

to power on the camera.

• Press once: take a photo or start/stop recording. When the camera is in sleep mode, press

once to start SnapShot.

Note: both both scenarios refer to situations when the remote controller is connected to the

camera.

Button Combinations

• Press and hold the shutter/record button and link button for four seconds: switch

between single-camera control mode and multi-camera control mode and start linking.

• Press and hold the quick switch button and shutter/record button for four seconds:

view the firmware version of the remote controller.

• Press and hold the quick switch button and link button for four seconds: forget the

Bluetooth connection and start linking.

Link Button

Shutter/Record Button