VATECH PaX-i3D Manual De Instrucciones página 48

5 Acquiring CT Images
5.1
1
2
3
PaX-i3D (PHT-6500) User Manual
Setting the Exposure Parameters
Perform the following procedures to set capture parameters for the specific
patient and capture mode.
[Xmaru1215CF–Plus sensor]
1. Click the CBCT button. The rotating unit will move to position for CT
scanning.
2. Select the FOV size for the CT.
3. Select the ROI to be captured under VERTICAL POSITION and
HORIZONTAL POSITION.
Once you have selected an FOV size and ROI (Region of Interest) to capture,
the area of the selected FOV and position of ROI will be viewed on the
guidance image as shown below. For the FOV 50 X 50, you may select a
specific tooth position to be captured on the full arch guidance image.
5 Acquiring CT Images
[Xmaru0712CF sensor]
47