GENERGY VULCANO Instrucciones De Uso página 77

2 Place an appropriate container under the oil draining hole to collect the drained
gasoline.
3 Using a screwdriver, loosen the carburetor draining screw. Gasoline will begin
streaming from the carburetor draining hole. Once all of the gasoline is drained,
tighten the draining screw again.
OIL DRAINING
DRAINING SCREW
4 Remove the spark plug (see page 26) and pour a tbsp of clean motor oil (10 ~
20 ml) in the cylinder. Pull the startup handle gently, this will make the engine
spin and distribute the oil. Then install the spark plug again.
5 Pull the starter rope slowly until you feel resistance. In this point, the piston is
rising in its compression stroke and the intake and exhaust valves are closed. This
position helps protecting the engine against internal corrosion.
STARTUP HANDLE
35