Ignition Switch - GENERGY VULCANO Instrucciones De Uso

3 Press the engine's ignition switch
to "ON" and then to "START",
release once the engine has started.
NOTE: If the engine does not
start up within 3 or 4 seconds,
release the ignition switch and wait
for a few seconds before trying again
to avoid overheating the ignition
switch.
4 Once started wait for a few seconds and then turn the choke lever to (open air
position) as indicated in the figure below. The engine will begin working stably and
is ready to have equipments plugged in.
.
VULCANO - TIMANFAYA Models
NOTE: Do not leave the choke in an intermediate position, the blend would be
too rich and the engine would not work properly.
During the first commissioning of the machine the battery's charge may be low if
stored for too long. If the charge is not sufficient, start up the equipment manually
(go to point 5.1). The battery is recharged automatically while the generator is
running.
CHOKE
TEIDE Model
17

IGNITION SWITCH