Checks Prior To Operation; Battery Connection (Only Electrical Models With Electrical Startup) - GENERGY VULCANO Instrucciones De Uso

4. Checks prior to operation:

4.1 Battery connection (only electrical models with electrical startup).

The battery is provided
disconnected terminal.
connecting the battery, check that the
engine switch is in the "OFF" or "0"
position.
If you have any
identifying the engine switch, check
chapter 3 (components identification).
1 Loosen the support fastening bolts for the battery, extract it and place it on a
leveled and secure surface.
2 Connect the generator supply wires on the battery terminals. Negative lead on
the negative terminal and positive lead on the positive terminal.
3 Install the battery by inverting the removal steps on the generator riser and fix
it to fastening rods.
NOTE: Respect the cable polarities, connect the red cable (+) to the red
terminal (+) of the battery and the black cable (-) to the negative (-) of the battery.
A wrong connection could damage the electrical parts of the team and the battery.
NOTE: Extreme precautions so as to not make unwanted contact with the
battery terminals and cables, among them or against a metallic part of the
machine.
with a
Before
questions on
11
FASTENING BOLTS
BATTERY