Idiomas disponibles
Idiomas disponibles
Start-up
f The LCD will show the factory default display of 21 °C when battery are first
X
installed . The temperature will update after a few seconds .
System Selector Switch
f The System Selector switch on the front of the thermostat determines the operating
X
mode of the thermostat . You may select COOL, OFF .
• Anytime you install or remove the thermostat from the wall plate, slide
the System Selector to the OFF position to prevent the possibility of a
NOTE
rapid system On – OFF .
• This product does not support Heat mode .
Fan Switch
f The Fan switch should normally be located in the AUTO position . The Fan will be
X
turned on along with normal operation of your system .
f To run the Fan on continuously, slide the Fan switch to the ON position .
X
Review Current Set Temperature
f Press either the up or down key once to see the Set Temperature .
X
- The factory default is 20 °C when started with the System Switch Off or Heat, and 26 °C when started with the System
Switch on Cool .
Rooftop_ODM_IBIM_EN_2020001B8001.indd 17
ENGLISH-17
2014-06-11 오후 8:07:20
