IPC Yanmar 1450 D Manual De Instrucciones página 56

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 104
MAINTENANCE SCHEDULE
A:
On receipt
B:
Twice a week
C:
Each week
D:
Every 20 hours
E:
Every 50 hours
F:
Every 100 hours
G:
Every 150 hours
H:
Every 300 hours
I:
Every 400 hours
I:
Every 400 hours
CHECK
Centre brush : check for nylon
cord or rope wrapped around
the brush and remove if
necessary
Centre brush : check the state
of wear of the brush
Side brushes : check the state
of wear of the brushes
Flaps/bin gasket : check the
state of wear of flaps and
gaskets
Dust filter : check that the filter
is clean and undamaged
Tyres : check that the tyres are
in good condition and the sides
are free from cuts
Steering : grease the steering
chain
Battery : check the acid level
Hydraulic circuit : check oil
level
Hydraulic circuit : check pipes
and hoses for damage
Internal combustion engine :
change engine oil
Internal combustion engine :
change filter oil
Internal combustion engine :
change air filter
Internal combustion engine :
clean air filter
Internal combustion engine :
check engine oil level
General control : check the
tightness of nuts and screws
A
B
C
D
See engine instructions
See engine instructions
See engine instructions
See engine instructions
See engine instructions
E
F
G
H
ENGLISH
I
17
loading

Este manual también es adecuado para:

121285