Franke FHBP 604 4I PW T XS Manual De Instrucciones página 27

Switching hotplates off
Switching the hob off
Locking the control unit / child
safety lock
Remaining heat indicator
Extra powerful setting
(hotplates marked "P")
20 seconds start one of the hotplates.
• Touching the desired hotplate sensor (A), its relevant power indicator
indicates »0«.
• By touching sensors »+» (E) or »-« (D) set the desired cooking power from 1
to 9.
Continuous pressing of »+» (E) or »-« (D) sensors the power level is
automatically increased or reduced. Another procedure is to change
power in steps is by intermediate touching of relevant sensors.
Setting is always possible for one hotplate only at the time. Power display
indicates »0«, or „H", depending on the existing temperature of the
hotplate (see Section Remaining Heat Indicator).
You can also turn the hotplate off prior the end of cooking and use the
remaining heat, and save energy.
• Selected hotplate must be activated.
• Touching the hotplate sensor »-» (D) set the power level to »0«. After
10 seconds the hotplate is turned off.
Fast deactivation
• Selected hotplate must be activated.
• Press both (A of selected hotplate) and (D) sensors simultaneously, and the
hotplate is immediately switched off.
• The hob can be switched off any time by pressing the ON/OFF sensor (C).
By activating the child lock protection you can stop the operation of the
appliance, i.e. the use of hotplates, protecting the children from accidental start
and eventual injury.
Activating child lock
• The hob is active.
• Press sensor (B) for at least 2 seconds. Timer's display showes the symbol
┏ o
( ) steady. Child lock is now activated.
• If hob is turned off by mistake, lock function is active still the next turn on.
Turning child lock off
• If the hob is switched off, turn the hob on by pressing the sensor (C). Timer's
display showes the symbol
• Press sensor (B) for at least 2 seconds. Child lock is now off.
Glass ceramic hob also features remaining heat indicator "H". Hotplates are not
heated directly, but through return heat radiating from the dish. As long as the
symbol "H" is on after the hotplate was switched off, the remaining heat may be
used for warming up food or for melting.
Even when the symbol "H" disappears, the hotplate may still be hot.
Be careful of burns!
Extra powerful setting may be additionally switched on for fast cooking on
predisposed hotplates. This extra hotplate power is used for heating large
quantities of food. After switching on, the extra power is activated for:
• 5 minutes, then automatically switches back on to the maximum normal
level 9.
During the time extra power is activated, the power of other hotplates is limited.
This is indicated on the power display by intermittently flashing the selected
cooking level and limited power for a few seconds.
(┏ o
).
27