JBM 50630 Manual De Instrucciones página 6

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
Indicates a hazard which, if not avoided, will result in DEATH OR SERIOUS IN-
DANGER
JURY.
Indicates a potentially hazardous situation which, if not avoided may result in
WARNING
DEATH OR SERIOUS INJURY.
Indicates a potentially hazardous situation which, if not avoided, may result in
CAUTION
MINOR OR MODERATE INJURY. This notation is also used to alert you against
unsafe practices.
3. ASSEMBLY
Your hydraulic table is almost completely assem-
bled when you open it. To complete the assembly
find the parts above enclosed with your table.
Place the lifting pedal (24) into the hole in the end
of the pedal pole and secure with M8x20 bolt (8).
Place the push handle (42) into the vertical tubes
positioned on the pedal end of the base assembly.
Secure with M8x40 bolt (13).
Fix the wire use wire fix brackets (35) into the holes
in the push handle (42) and base assembly.
Use cable ties fix the release wire if necessary.
Your assembly is complete!
Before delivery we have put the adjusting bolt to the
best station.
If there are any outside influences such as transfer,
the jack free fall after put on heavy goods, please
adjust the bolt to the best station (follow direction of
above arrow).
NOTE
Don't put hand close to the scissor stand when you release oil to avoid danger.
Controlled release handle can control the speed of falling, when put on heavy goods, don't
use fastest speed to release.
Don't touch the release handle at the time you put on heavy goods to avoid danger.
4. SAFETY PRECAUTIONS
WARNING - DO NOT EXCEED RATED CAPACITY.
WARNING - Do not use the Hydraulic Table to lift or move persons.
WARNING - This table was designed for use on hard, level surfaces capable of sustaining the
load. Use on other than hard, level surfaces could result in load instability and possible loss of
load resulting in property damage and PERSONAL INJURY.
DANGER - Keep clear of the scissor lifting frame area beneath the table for lifting or lowering
operations. Scissor lifts have pinch areas between the frames which can cause serious injury if
hands or feet are not well clear of this area.
WARNING - Do not use attachments or adapters of any type to modify this lift.
WARNING - Always use the hydraulic table on clear and level ground, avoid goods drop from
the table.
WARNING - Set the brakes on the rear casters when loading or unloading.
· 6 ·
loading