Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Fan Blades
6
Attaching the fan blades
NOTE: Your fan blades are reversible. Select the blade
side finish which best accentuates you decor.
□
Attach a blade (G) to a blade bracket (H) using the
screws (EE) provided. Please note that the rubber
washers are pre-attached to the blade bracket (H).
Insert a screw (EE) into the blade bracket (H). Repeat
for the two remaining screws.
□
Tighten each screw (EE) securely.
□
Repeat for the remaining blades.
7
Attaching the blade brackets
□
Fasten the blade bracket (H) to the motor (E) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (E) and tightening the motor screws (GG) that are
pre-assembled to the blade bracket (H).
□
Repeat for the remaining four blade brackets (H).
Assembly - Attaching the Switch Cup
1
Attaching the switch cup
□
Remove the three screws (HH) from the black bracket at the
base of the fan motor assembly (E).
□
Connect the adaptor plug from the switch cup (F) to the plug
from the fan (UU).
□
Align the three screw holes in the switch cup (F) with the
three screw holes in the black bracket at the base of the
fan.
□
Position the switch cup (F) onto the black bracket and install
the screws (HH) that were removed in the first step.
□
Attach the pull chain extension (AA) provided to the fan pull
chain.
EE
HH
E
F
AA
11
Please contact 1-855-HD-HAMPTON for further assistance.
G
H
E
G
H
GG
UU
HAMPTONBAY.COM
