Xiaomi Smart Cooking Robot Manual De Usuario página 14

Seing speed
1. Tap the speed seing icon to enable speed seing.
2. Rotate the control knob to set the rotation speed.
CAUTIONS
· The speed can be changed at any time during
cooking (except for certain modes).
· The cooking robot can start cooking aer the time
and speed are set.
· There are 20 speed levels for both forward and
reverse rotation. Turn the control knob clockwise to
adjust the forward speed, and counterclockwise to
adjust the reverse speed. The higher the level, the
faster the speed.
· Do not use high speeds when cooking hot food or
soup over 60℃, so as to prevent the food from
overowing and causing burns.
· By rotating the control knob clockwise or counter
clockwise, you can change the rotation direction of
the blender blade. To gently stir and mix the food, use
the reverse rotation.
Preset modes
The cooking robot has multiple preset modes to meet various cooking needs. You can go to the home screen to select the
preset modes including weighing, extreme rotation, dough kneading, ice shaving, juicing, grinding, mincing, chopping,
cleaning, steam/boil, or stew. Take the mincing and weighing modes as examples and follow the steps below.
Mincing
1. Clean the ingredients and cut them into small pieces, then put them into the pot. Make sure that the amount of the
ingredients does not exceed the pot maximum level.
2. Correctly install the pot onto the cooking base, then put on the pot lid. Make sure that the lid is installed correctly and locked
onto the pot.
3. Turn on the cooking robot, select mincing mode on the screen, and press the control knob. The cooking robot will run based
on the preset values and automatically stop upon completion of the process. Press the control knob to pause midway.
4. Remove the pot from the cooking base once ingredient processing is completed, and use the scraper to take out the food.
CAUTIONS
· Remove tendons, bones, and skin from the meat before processing, and thaw the frozen meat rst.
· Please do not use the mincing mode to process hard ingredients like frozen meat, ice cubes, or bones.
· The cooking robot will shake slightly during operation, please do not leave the cooking robot unaended.
· Turn o the cooking robot if it vibrates excessively or ingredients stick to the sides of the pot. Use the scraper to spread the
ingredients evenly across the boom of the pot and then turn the cooking robot back on.
Weighing
1. Install the pot onto the cooking base and select weighing mode on the mode screen.
2. Place the ingredients to be weighed into the pot, and the screen will then display the weight of the ingredients.
3. Press and rotate the control knob to zero, and then add the next ingredient to the pot. The weighing process can be repeated
till an accumulated maximum weight of 5000 g is reached.
CAUTIONS
· The weighing mode can only be used when no any other modes are running.
· When using the weighing mode, please make sure that the cooking robot is on a level surface. Otherwise, the weighing results
may be inaccurate.
· Tap "" in the top le corner of the weighing screen to exit weighing mode.
12