Idiomas disponibles
Idiomas disponibles
3.4 I Electricity supply connections
To prevent all risks of electrocution, fire or serious injury, please comply with the following
instructions:
• Use of an electrical extension is prohibited when connecting the control box.
• Make sure that the socket can be easily accessed at all times and is protected from rain or
splashes.
• The control box is splash-proof, but must not be immersed in the water or any other liquid.
It must not be installed in a floodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
• Place the control box near the socket.
• Unscrew the protective cap (see figure
• Connect the floating cable to the control box and lock it in place by turning the ring only in the clockwise direction (to
prevent damage to the floating cable) (seefigure
• Make sure that the connector is fully pushed in so that no water can get in (see figure
• Connect the power cord (see figure
maximum residual current device (if in doubt contact a qualified technician).
Tip: positioning the unit for better operation
Place the control box halfway along the length of the pool, in accordance with the safety conditions relating
to the electrical connection.
8
).
).
,
). Only connect the control box to a power outlet protected by a 30 mA
).
