Idiomas disponibles
Idiomas disponibles
4.3 I Cleaning the propeller
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when handling the propeller
• Remove the filter using the handle (see figure
• Remove the external flow guide by lifting it so as to clear the clips (see figure
• Upon first removal, you will notice that the internal flow guide is securely tightened, which is why we recommend
inserting a screwdriver into the holes to loosen it by turning the screwdriver in the anti-clockwise direction (see figure
).
• Once the internal flow guide has been loosened, unscrew it by hand (see figure
• Remove the internal flow guide (see figure
• Put on a pair of gloves and pull the propeller, holding it firmly to take it out (see figure
• Remove any debris (leaves, stones, etc.) which may be blocking the propeller (see figure
12
.
).
).
).
).
).
).
