Federal Signal Global G-STR Instrucciones De Instalación Y Mantenimiento página 8

Installation and Maintenance Instructions
Figure 1 Beacon and sounder combination fixture
Mounting the Beacon
ATTACH THE BEACON SECURELY: To prevent injury, this
apparatus must be securely attached to the mounting surface
in accordance with the installation instructions. Use installer-
supplied fasteners suitable for the mounting surface.
The mounting method and the installer-supplied mounting hardware
depend on which of the three G-STR models you are installing:
Mounting the Trunnion-Mount Beacon
For the beacon dimensions, see Figures 2 and 3 on page 9.
Mount the trunnion bracket to a flat surface using the two 7.0 mm
mounting holes (Figure 4 on page 10). Use installer-supplied
fasteners suitable for the surface to which the device will be
mounted.
To adjust the vertical angle of the beacon, loosen the fasteners on
the mounting bracket to disengage the ratchet. Vertically aim the
beacon, and tighten the fasteners.
8
All manuals and user guides at all-guides.com
Model G-STR Global Series Strobe Beacon