Idiomas disponibles
Idiomas disponibles
START-UP
Open the protective cap (3), push the toggle switch (8) to the ON position, and press the ON/OFF button (7), in order to light the operating indicator (6) located at
the front of the tool. Now you can use the soldering iron.
SOLDERING PROCESS
Preheat the heating head and welding tin.
Remove the oxide layer from the surface of the heating head to the soldering spot, and let a proper amount of tin to flow from the heating head to the soldering.
Allow the heating head to stay at the soldering spot for 1 or 2 seconds, so that the tin completely wraps the soldered object in the soldering spot, causing suffi-
cient soldering.
Remove the heating head and waiting 2 minutes in the air for the soldering spot to cool down before releasing the soldered object.
The tool shuts off after not pressing the switch button (7) for 12 seconds, the device will automatically cut off power. To resume operation, you have to press the
ON/OFF button (7) again.
RECHARGE
If, during operation, the LED operating indicator (6) flashes continuously and slowly, this indicates that the battery has run out and you should recharge it at this
time.
If the battery indicator (10) is on in red colour, this indicates that charging is in progress. However, if the battery indicator (10) is on in green colour, this indicates
that charging is completed.
Use a USB type-C charging cable to connect to the power adapter and recharge the product.
SHUTDOWN
Release the ON/OFF button (7) to shut it off.
REPAIR AND MAINTENANCE
Attention: Turn off the soldering iron before maintenance and cleaning tasks.
Keep the soldering iron clean and organised to ensure its good and safe operation.
Do not dispose of this product as household waste.
TROUBLESHOOTING
PROBLEMS
The operating indicator flashes slowly
The operating indicator flashes quickly
The battery indicator is not turned on
The product does not recharge
GUARANTEE
Cofan La Mancha S.A. offers the customer —in addition to and without limiting the guarantee rights to which is entitled by law— the entitlement under the terms of
the following secured obligations for new appliances:
I. Commencement and duration of guarantee
1.
The guarantee coverage period will be:
a) 36 months for home appliances
which have been put to appropriate use.
2.
The guaranty shall start from the date of purchase stated on the invoice of the appliance.
II. Terms of the guarantee
1.
The appliance shall be purchased from a specialised authorised shop or directly from Cofan la Mancha, S.A., in one of the countries of the EU.
2.
At the request of the sales service personnel, it is necessary to show the guarantee receipt (purchase invoice or guarantee card).
III. Content and coverage of the guarantee
CAUSES
The battery is low
Internal module failure
The battery indicator is damaged
The power adapter is incompatible
SOLUTIONS
Recharge the product immediately
Stop using the product immediately
It is recommended to stop using the product
Use a 5V 1A/2A power adapter
8
