Idiomas disponibles
Idiomas disponibles
ADJUSTING FAN PATTERN
The angle of spray coming out of the lance may be adjusted on some lances by rotating the nozzle.
This will vary the spray pattern from approximately a 0° narrow high impact stream to a 60° wide fan
spray. (See Figure2)
A narrow stream has high impact force on the cleaning surface and results in maximum deep
cleaning in a concentrated area. However, this narrow high impact spray must be used cautiously,
as it may damage some surfaces.
A wide fan pattern will distribute the impact of the water over a larger area, resulting in excellent
cleaning action with a reduced risk of surface damage, Large surface areas can be cleaned more
quickly using a wide fan pattern.
NOZZLE CLEANING INSTRUCTIONS
A clogged or partially clogged nozzle can cause a significant reduction of water
coming out of the nozzle and cause the unit to pulsate while spraying. To clean out the nozzle:
• Turn off and unplug unit.
• Turn off water supply. Relieve any pressure trapped in the hose by squeezing trigger 2-3 times.
• Separate lance from gun.
• Rotate nozzle to the narrow stream setting. This opens up the fan blades.
• Using included tip cleaner, or an unfolded paper clip, insert wire into the nozzle hole and move
back and forth until debris is dislodged. (See Figure 3)
8
